Water Treatment Equipment
easiflo® Chlorine FeedersThe family of hth® easiflo® chlorine feeders are suitable for almost any size of pool, and are designed to eliminate problems associated with pumps, tanks and agitator based systems. Simple to use and low maintenance, with no foot valves, dosing pumps and injectors used within the system - limiting the costs and the maintenance issues related to many dosing systems.
The entire range of Easiflo® feeders utilises only hth® easiflo® BRIQUETTE and can be used in conjunction with an automatic controller, such as the hth® CYCL'EAU® water quality controller system. Selecting the correct feeder you require will depend on the bather load of the pool - our Technical Services Team can advise you. |
The Easiflo® system generates a consistent halogenated solution - concentration between 1.2 and 2% available chlorine at 1 bar depending on the selected model - helping to maintain a constant level of chlorine within the pool.
The feeder is non-pressurised and a detector on the lid, shuts down the spraying of briquettes when it is opened and prevents the projection of disinfecting solution towards the operator. |
Easiflo® 1An entry level hth® easiflo feeder ideal for economical automatic dosing where chlorine demands are low.
|
Easiflo® 20 / 50 / 100There are 2 systems within the new generation of hth® easiflo® feeders, designed to suit specific situations and are available in varying sizes which can hold 20, 50 and 100 kg of easiflo® briquettes.
hth® easiflo® Premium for municipal and large commercial pools hth® easiflo® First for pools opened on a seasonal basis - camping parks, resorts
|
Premium 20 / 50 / 100
Specifically designed for municipal and large commercial pools
|
Specification |
Easiflo® Premium 20 |
Easiflo® Premium 50 |
Easiflo® Premium 100 |
Average pool capacity |
20 - 500 m3 |
400 - 1000 m3 |
800 - 2800 m3 |
Spray Nozzles |
2 |
4 |
6 |
Base & wall wash-down system |
YES |
YES |
YES |
Flushing system |
YES |
YES |
YES |
Maximum chlorine production per day |
24 kg |
64 kg |
120 kg |
Chlorine solution strength @ 1 bar |
1.2% Av/Cl |
1.6% Av/Cl |
2.0% Av/Cl |
Electronic Control Panel |
YES |
YES |
YES |
width x depth x height (lid open) |
723 x 555 x 1173 mm |
850 x 660 x 1335 mm |
968 x 860 x 1591 mm |
First 20 / 50
Specifically designed for seasonal pools (camping parks, resorts)
|
Specification |
easiflo® First 20 |
easiflo® First 50 |
Average pool capacity |
20 - 500 m3 |
400 - 1000 m3 |
Spray Nozzles |
2 |
4 |
Flushing system |
YES |
YES |
Maximum chlorine production per day |
24 kg |
64 kg |
Chlorine solution strength @ 1 bar |
1.2% Av/Cl |
1.6% Av/Cl |
width x depth x height (lid open) |
723 x 555 x 1173 mm |
850 x 660 x 1335 mm |
Pump and Tank SystemsOur granular products are generally dosed manually via a dissolving tank (similar to those used for dosing sodium hypochlorite - liquid chlorine) which is adapted with a mixing device. Wherever possible, site surveys by our Technical Services team can identify existing equipment that can be utilised, assuring the correct specification with minimum cost. Briquettes can be used in this system with the addition of a suspension net which we can supply if required.
|
Ensuring measured, proportional disinfection of any water system is of utmost importance. The hth® CYCL’EAU® controllers measure and regulate the chlorine, pH and temperature (model specific) of swimming pool water with the option to include remote internet monitoring.
|